Industrial Open Front Skid Steer Brush Cutter The Mega Mower X

Price: Standard Flow $9,995 + Shipping Fees May Apply

High Flow $11,795 + Shipping fees May Apply

Description

Clear and mulch the heaviest brush, grass, and trees with the Mega Mower X Industrial Open Front Brush Cutter. This design levels forests and overgrowth, allowing you to reclaim what once was. The industrial deck is reinforced for maximum cutting potential and long-term durability. Open deck design and heavy-duty push bar make quick work of large saplings and small trees.

  • Industry first, patent pending, serrated sides plates allow for limbing of overhanging branches

  • 12 carbide tipped thumbnail teeth line the bottom to stir material and aid in the grinding of stumps

  • 1/4” side plates run the entire length of the mower and tie directly into the push bar and tubular supports

  • 2” x 4” 3/16” thick grade 50 steel tubes support the deck, are tied directly into the side plates, and are twice as strong as C-channel used in most brush mowers

  • Blade retention uses castle style nuts with a pin to retain them from loosening during operation as safety is our number one concern

  • Fully forged bearing carrier shaft to hold up to gyroscopic forces mower’s endure in rugged conditions and terrain

  • 3/4” single piece flywheel with rounded corners made from 50,000 psi minimum yield strength steel with additional 1/2” reinforcement

  • Long, angled skid shoes are designed specifically for mulching material into finer pieces by putting the nose down to let the high speed blades mulch material

  • 5” AR400 steel axe blades are abrasion resistant to mulch material close to the ground without wearing out quickly

Specifications

  • Model- 72" Standard Flow / 72" High Flow

  • Part Number 901589 / 901590

  • Operating Weight 1,330 lb. / 1,380 lb.

  • Overall Height 27" / 27"

  • Overall Length 77.5" / 77.5"

  • Overall Width 76" / 76"

  • Blade Carrier Thickness 3/4" Grade 50 Steel / 3/4" Grade 50 Steel

  • Cutting Width 72" / 72"

  • Number of Blades (4) 1/2" AR400 14.5" Long / (4) 1/2" AR400 16" Long

  • Number of Carbides 12 12

  • Flow Range 15-25 GPM (Standard Flow) / 25-41 GPM (High Flow)

  • Maximum PSI  5004 6414

  • Blade System Mass 340 lbs. / 340 lbs.

  • Tip Speed  17,700 ft/min @ 25 GPM / 11,960 ft/min @ 25 GPM & 19,140 ft/min @ 40 GPM

  • Wire Catchers Yes / Yes

  • Bearing Carrier Weight 75 lbs. / 80 lbs.

  • Output Bearing Size 2.875" / 2.875"

  • Blade System Energy 106,179 ft/lbs @ 25 GPM / 106,179 ft/lbs @ 25 GPM & 124,062 ft/min @ 40 GPM

  • Energy Stored in Blades 32% / 32%